Published: Jun 30, 2021

Articles

A study on partial replacement of fine aggregate to quarry dust

1604-1610 S.DhivyaBharathi, M.Ranjitham, M.MadhanKumar, R.Monojkumar, Nithish Kumar

Strength and durability properties of concrete made with granite industry waste

1588-1595 Dr.M.Vijayalakshmi, Mrs.M.Suganya, Mr.P.Ananthaprabhu

Strength properties of extruded polyester fibrereinforced concrete with partial replacement of fine aggregate by foundry sand

1596-1603 Ranjitham M, Manjunath N V, Ashwin D, Maheswaran C, Monica D

Seismic response of RC-multistoryed building resting on pile foundation considering interaction effects – a review

1611-1615 B. Muthu Malini, B. Soundara

Comparative study on mechanical properties of ultra high strength concrete using natural sand and manufactured sand

1616-1621 Divya.A, Sathyakumar.N

Experimental investigation on the structural behavior of cold formed lean duplex stainless steel hollow oval section columns

1622-1633 S. Vijayanand, M. Rathipraba

Experimental investigation on partial replacement of coarse aggregate with used tyres

1641-1648 P.Preethiga, K.Gayathri, D.Sakthivel, S.Ramesh Kumar

Numerical study on strength and behaviour of cold formed steel built-up battened columns

1634-1640 Mr.S.Vijayanand, M.Vignesh

Seismic analysis of R.C framed buildings resting on hilly slopes

1655-1662 PreethaV, GokulPrasath S, SureshKannanS, YohaPrakash S A

A study report on safety performance in road construction

1663-1667 G. Arvindh, Dr. R. Loganathan

A review study on asphalt binders

1668-1677 S. Loganayagan, , S. Suvetha, C. Vishalachi

A study on investigating the effectuation of renewable energy for sustainable development in construction sector

1678-1685 N.Geethanraj, T.S.Mukesh

Investigation of factors influencing cost analysis on progressing the project

1686-1690 Saravanan.M.S., Kulanthaivel.P.

An overall review on wind power generation as renewable source of energy leading towards sustainability

1691-1695 P Keerthana, D Ambika

A study on impact assessment of pollution in Sipcot, Perundurai

1697-1704 R Sowmiya, D Ambika, V Sampath Kumar

Study on cost deviation in construction of residential projects

1705-1711 M Mathevanan, D Ambika

Experimental investigation on high strength concrete with polypropylene fiber and M sand

1712-1718 Karthick D, Ravisankar K L

Behaviour of reinforcement concrete sand wich beams

1719-1727 Ramasamy.B, Amirthagadeshwaran.G

A study on mechanical properties of engineered cementitious composites

1728-1735 M.Kirubakar, K.Sampath Kumar

Study and analysis of occupational risk factors for ergonomic design of construction work systems

1736-1743 C.Gobu, T.S.Mukesh

An experimental investigation on partial replacement of coarse aggregate with plastic waste in rigid pavement

1744-1751 Sowmiya G, Amirthagadeshwaran G

An experimental study on structural behaviour of blended cement concrete

1752-1759 Tamil Selvan J, Abdul Hameed A

Development of performance of soil cement brick using banana fiber

1760-1766 M.Ranjitham, A.Mohanraj, N.V.Manjunath, S.Dhivyabharathi, A.Anandhaprabhu

Partial replacement of coarse aggregate by using ceramic tile aggregate in concrete

1767-1772 Prakash.S, Baskar.S, Tamilarasan.A, Venkatesh Prasath. P, Abdul Hameed. A

An experimental investigation on high strength self compacting concrete using jute fibre

1773-1781 A J. Briscilla, B K. Selvi

An experimental study on strength property of concrete by partial replacement of coarse aggregate with seashell and cement with fly ASH

1782-1789 S. Manikandasamy, N. Gowsalya, R.Gobi, R. Alageswaran, P.Karthika

Experimental study on natural fibre in concrete

1790-1795 P. Vijay, P. Arunkumar, S. Mithun, M. Selvaraj, K. C. Denesh

Experimental investigation on influence of polypropylene fiber on strength parameter of concrete

1796-1803 K. L. Ravisankar, R. Latha, T. K. Mohamed Yousuf Kamil, A.Alfan, B. Sivaprakash

An experimental study on pervious concrete

1804-1809 M.Ranjithkumar, K.Jaganvicky, T.Mukilarasan, A.Nirmal kumar, K.Selvi

Experimental investigation on properties of concrete using lime sludge

1810-1816 K.Selvi, K.Nandhini, N.Gandhirajan, C.Karthik, V.Tharun prasad

Experimental investigation and optimum utilization on fly Ash and GGBS based GEOPOLYMER concrete

1817-1826 K. L. Ravisankar, R.Saranya, B.Anupriyanka, S.Jagathesh, P.Akil

Study on durability properties of silica fume in concrete – A Review

1827-1831 S.K.Gowthame, B.Kiruthika Nandhini, B.Arjunkumar, S.Karvendhan, T.Mariyappan

Mechanical properties of concrete by partially replacing cement by agricultural waste – Rice husk Ash

1832-1838 KU.Mani Kandhan, C.Keerthana, P.Devaraj, K.Manoj, S.Aswini

Experimental investigation on glass fiber reinforced concrete with addition of fly ash

1839-1848 M.Yeswanth, T.Varshini

Mechanical behaviour of glass fiber reinforced concrete

1849-1855 V.M.Gnanasundar, P.S. Ashwin Kumar, S. Poovasanthan

Experimental investigation on partial replacement of coarse aggregate by coconut shell in concrete

1856-1862 Tharanya.S, Pradeep kumar.S, Santhosh .M, Pravin kumar.G, murali.S

Experimental investigation on concrete by partially replacing cement by GGBS and coarse aggregate by crushed tiles

1863-1870 Mr.S.Gnana VenkateshM.E.,, J.Logesh moorthi, S.Kumbeshwaran, T.Dinesh, V.K.Karunakaran

Experimental study for partial replacement of coarse aggregate with recycled rubber crumb

1871-1875 Tharanya S, Parthasarathy.S, Sridharan.S, Suriya.C, Yokash.M

Experimental study on high strength concrete by using recycled coarse aggregate

1876-1880 K.C.Denesh, K.Sathiyamoorthy, B.Satheeshkumar, M.Sanjaykumar, S.Vicky

Experimental study on behaviour of Well Seasoned Bamboo as reinforced concrete in beams

1881-1885 K.C.Denesh, M.Gnanasekar, M.Gunaseelan, K.Jeevanantham, S.Karthick

Experimental investigation on paver block with partial replacement of m- sand by steel slag

1886-1891 M.Yeswanth, K.Praveenkumar, K.K.Vijay, A.Vijayakumar, R.Nandhakumar

Experimental investigation on paver block with partial replacement of cement by fly ash with addition of glass fibre

1892-1897 M.Yeswanth, M.Tharani, T.Baskar, P.Manikandan, V.Karthikeyan

Experimental investigation on partial replacement of cement by Egg shell powder in concrete

1898-1903 Tharanya.S, Muraleetharan.K, Mohaneshwaran.A, Sithaiyan.S, Shyamsunder.D

Comparative study on tensile property of different grades of concrete containing glass fibres

1904-1909 A.Anitha, S.Aravindaswamy, S.Shivasankar

An experimental study on replacement of course aggregate in pervious concrete using HDPE plastic

1910-1918 Pradhap.S, Madhavan.B, Gowtham.S, Sathish Raj.S, Amirthagadeshwaran.G

An experimental study on partial replacement of cement by silica fume and steel slag

1919-1926 G.Naveen, S.Narendran, V.R.Ponmanaselvan, S.Suresh Kumar, Mr. S. Gnana Venkatesh, M.E.,

Experimental study on partial replacement of fine aggregate by eco-sand in concrete

1927-1933 G.L.Bharanitharan, D.Gobi, P.Karthik, G.Prabaharan, R.Pradheepa

Evaluation of non-conventional concrete by Self-Curing method

1934-1939 S.Arun, P.Bhuvaneshwaran, L.Jagan, R.Julia Elavarasi, A.Abdul Hamed

Experimental study on paver block using alternative Cementitious material

1940-1946 R. Pradheepa, M.Nanthini, P.Thilip kumar, S.Vidya Bharathi, T.P.Vigneshwaran

Effect of replacing fine aggregate with cast iron slag on strength of concrete

1947-1952 Ms.P. Karthika.M.E, R. Prakash, R.Vidhyapathi, B.Arun Kumar, S.Mahakrishnan

Validation of experimental results of cold formed steel built up section with analytical and theoretical analysis

1953-1959 S. Gnana Venkatesh, E.Jayanth, T.Vikneshwar

Least cost design of RC singly reinforced beams using bacterial foraging optimization technique

1960-1966 Karthiga Shenbagam N, Dr.K.Babu

An experimental study on behaviour of SIFCON with replacement of fine aggregates by quarry Dust

1967-1972 S.Marappan, M.Mohammed Rashoo Mohaideen, S.Senthil Murugan, U.Udaya Sankar, P.Karthika

Replacement of cement with hypo sludge (partial replacement)

1973-1977 V.M.Gnanasundar, Mr.R.Vikashraj, Mr.V.Veeramukundu

Construction of road by using waste polythene

1978-1982 V.M.Gnanasundar, Mr.S.Shivalic Sankar, Mr.S.Chandrakeshwar

Study on durability properties of engineered CEMENTITIOUS composites

1983-1989 M.Sivasenthil, K.Sampath Kumar

A study report on material management in construction industry

1990-1994 R.Ramya, K.E.Viswanathan

Analysis and Design of Pre-Engineered steel truss buildings

1995-1999 Venkatesh K, Jayanthi V

Detection of land cover change using fuzzy segmentation algorithm

2236-2244 M.Ramya, R.Ramya, K.Sangeetha, V.Prakash, Dr. N.S.Nithya, Dr.E.Baby Anitha

Dual server keyword search with public key exchange using keyword mapping technique

2245-2249 N.Giridharan, L.Sangavi, T.A.Sastinath, M.Sharmila Devi

Search rank fraud and malware detection in Google play application

2250-2257 Nivodhini M.K, Vasuki .P, Lokesh .L, Monish Kumar, D, Naveen Kumar P.S

Detecting malicious node attacks on WSN using ABE

2258-2261 M.Parvathi, K.Gokulchander, K.Karthikeyan, P.Mathivanan, G.Mohanram

Prevent election data tampering using block chain technology

2262-2267 Ms. P. Vanitha, S. Aswin, R. Aswin, Indra Kumar.B, Jaya Suriya

Identifying unknown and identical users in cross-application social media networks

2268-2272 Mrs.S.Kavitha, Naveen Kumar.D, Santhosh Kumar.S, Vijhay Raj.M

Intense protection and tracking devices for agriculture exploitation based on IOT

2273-2282 G.Sasikala, K.Aishwarya, E.Iswarya, S.Mythili, A.Lavanya

Smart parking system based on NFC

2283-2288 N.Nasurudeen Ahamed, S.Priyanga, T.Ramyapriya, K.Reeta, S.Sangavi

Designing a dynamic task scheduler in map reduce for hadoop framework

2289-2293 D.Radhika, C.Shalini, T.Uma Maheswari, S.Pooja, G.Subatharani

Review of web service technologies: Soap vs XML

2294-2297 Mr.S.Karuppusamy, S. Gowtham, R. Logeswari

Pin Security Scheme Using Haptic Feedback

2306-2313 Mr.S. Karuppusamy, Monalisa Koley, N.Nagapavithra, V.Shanthidevi, P.P.Shobana

Self protection in cloud resource management

2314-2321 Mrs.S Maheshwari, Pratheeksha K A, Praveen T, Ranjith K U

IOT Based Real-time Monitoring System of Atmospheric Gases Using Arduino Uno

2322-2327 S. Ajith, C. Jothy Hari Krishnan, E. Karthick, Dr. P. Thirumoorthy M.E. Ph.D

Techniques for securing the data in cloud computing

2328-2332 Dr.P.Thirumoorthy, R.Gowsalya, P.Sabarishamalathi

Salient Region Detection for Video Surveillance

2333-2342 Mrs.K.Kavitha, N.Keerthana, E.Monisha, R.Ragavi, R.Sowmya

Student fees report management

2343-2349 T.Naveen Kumar, M.Pavithran, K.Srivatsan, K.Gunasekar

Review of speech recognition in artificial intelligence

2350-2355 Mr.K.Gunasekar, M.Deepika, M.Usharani

ECDH algorithm for data storage security in cloud data centers

2356-2363 V.Manimaran, A.Renuka, M.Santhiya, B.Swetha

An Efficient Resource Allocation for Dynamic Workflow in IaaS Cloud

2364-2375 S.Monisha, S.Mounika, K.Sruthy Sudhakar, Mr.S.Prabhu

Sesper: secure sharing of personal health records

2376-2385 Mr.S.Karuppusamy, C.Mythili, K.Rithvika, P.Sangavi, M.Seetha

Scalable access control for privacy-aware media sharing

2386-2393 Mrs.Vanitha, S.Mahesawaran, M.Manjula Devi, P.Manoranjitham

Enhanced attribute-based data sharing key-exchange algorithm in cloud computing

2394-2399 E. Padma, G.Naveenkumar, R.Srinivasan, V.Yogesh, M.Vigneshwaran

Rumour identification in social media using time varying network topology

2400-2405 A.Jose Prakash, , C.Keerthiraja, P. Kirubhakaran, T. Nithyanandhan, M. Senthamarai

Characterizing and Predicting Early Reviewers for Effective Product Marketing on E-Commerce Websites

2406-2419 Mrs. S Maheshwari, Nandhini S, Nithya G, Yugesh J

Secure Data Sharing and Verification in Public Clouds

2420-2426 Mrs.K.Kavitha, S.Meenalosini, J.Akshaya, S.Kavitha, P.Loganathan

Audit free secure data cloud using enhanced key management

2427-2433 Mrs.S.Sasirekha, N.Bharath Raj, R.Devagi, J.Kamali, V.Keerthana

Virtual Machine Placement in Cloud

2434-2442 Mrs.P.Uma, V.A.Mouleeswaran, K.Mynthan kumar, R.Praveen kumar

BOT car-based on IOT

2443-2447 Ms. M.Senthamarai, V.R.V BathriAkash, K.Dineshkumar, R.Gunasekar, D.Vignesh, D.Vignesh

Towards efficient ECC based provable data possession protocol with data dynamics for secure cloud storage

2448-2456 E.P.Kaushik, P. Boobalan, K. Dhamodaran, S. Karthik, S. Prabhu

Secure virtual machine based multi keyword data sharing on public cloud

2911-2917 Mrs. B.Deepa, G.V. Kavipriya, K. Lakshmipriya, P. Karthik

Stamp enabled energy efficient search scheme over encrypted cloud data

2457-2468 V.Manimaran, M.Pavithra, P.Sanmati, S.Savitha, P.VasanthaRohini

Information retreival complex query mapping on multi agent cloud

2469-2487 Mrs.B.Deepa, S.Rashma, R.Rubana, N.Sandiya

Aggressive voltage and temperature control for power saving in mobile application processors

2488-2499 Dr.D.Vanathi, Nathanial Alexander A, Naveen Kumar.P, Ramesh. A

Supply chain management application for home cooking consumers

2500-2505 R.Gokulakannan, U. Madhankumar, A.Ashokraja

IOT based platform as a service for air pollution monitoring system

2506-2511 Dr.C. Rajan, S.Banu Chandar, P.Dhinesh Kumar, J.Francis Jebarson

Safety guard for power press machine

2526-2528 G. Kannan, S. Jayasurya, T. Naveen, P. Elavarasan, S. Govindharaj

Design and fabrication of 3D printer and hand writing machine

2529-2533 G. Kannan, S. Abhinavkarthik, P. A. Dharanidharan, M. Dineshkumar, R. Gobi

Design modification of top and bottom fixture of Hydraulic pressing machine to accommodate lead wire

2534-2543 R.Vinoth, A. Asharudeen, E. Balachandar, M. Dinesh Kumar, S. Dinesh

Comparative analysis of wear rate (CR-ZN-NI) coated HSS tool and non- Coated HSS tool

2544-2550 Mr.Omprakas.M.A, Renuka.M2, Saddiq.M, Vinothkumar.M2, Sivasubramanian.R

Design and fabrication of sugarcane planting machine

2551-2556 D. Latha, C. S. Naveen, V. Naveenkumar, C. Sangeethkumar

Design and analysis of leaf spring by using composite materials for light weight vehicles

2557-2562 Mohamed Ajmal Mahasin. M, Kesava Moorthy. R, Logesh. M, Mathankumar. R, Poornachandran. T

Simulation and analysis of four lobe hollow steering shaft by roll forming

2563-2569 D. Ravichandran, V. Karthikraja, R. Karthikeyan, , K. Prawinkamashi, S. Sakthivel

Design and fabrication of frictionless electromagnetic braking system

2570-2574 M. Sugumar, S. Krishna moorthy, J. Manoj kumar, T. Manoj kumar, R. Poovananthan

Automated Core Sand Preparation in Balanced Manner System

2575-2582 N. Senniangiri, G. Gokul, P. Gokul, M. Ragu, N. Sanjithkumar

Design and fabrication of electromagnetic braking system for four wheeler

2583-2588 M. Sampathkumar, A. Sakthivel, P. Tharun Prasad, S. Vinothkumar, R. Vinothkumar

Effect of cutting parameters on wear behavior of coated tool with titanium nitride

2589-2593 M. Sengottaiyan, P. Sathish kumar, P. N. Surendhar, K. Vasanth, P. Vimalraj

Design and analysis of Rocker Bogie field Mobile Robot

2594-2598 S. Muruganantham, S. Karthikeyan, P. Karunakaran, S. Naveen, S. Nishanthan

Design and fabrication of treadmill bicycle

2599-2604 K. Ganesa, R. Sampath Kumar, M. Selva Kumar, K. Sanjay Kumar, M.Sridhar

Analysis of Welding Parameters of MIAB Welding for T91 Material

2605-2609 S. Eswaran, R. S. Madhan Mohan, S. Naveen Prasad, G. Peruncheraladhan, G. Poovarasan

Fabrication of wheel trencher attachment for tractor

2610-2612 B. Velliyangiri, K. M. Dhanasheelan , A.Gowtham, S.Karthi, P.Karthick

Fabrication of thermoelectric power generation by waste heat recovery in automobiles

2613-2617 M. Sampathkumar, R. Naveen, V. Naveen, T. Ohmswaroop, A. Santhosh

Investigation of coconut shell powder over new application

2618-2622 M. Sukumar, R. Jayanth, D. Sasikanth, K. Vignesh, T. K. Vishnu

Experimental analysis of spur gear made by different composite materials

2623-2630 S. Balakrishnan, J. Raguraam, A. Shreeguhun, K. R. Saikumar, S. Ruthreshan

Fabrication and analysis of hybrid two wheeler

2631-2635 T. Venkateshan, R. Selvakumar, R. Shanjith Krishna, K. S. Vijay, P. Vijayaprakash

90 Degree rotate steering mechanism in electrical cars

2636-2639 Mr. K. Pradeepkumar, B. Kavin, S. Manoj, R. Nanthakumar, S. Prabanjan

Design, analysis and fabrication of motorcycle helmet to enchange the rate of heat transfer using pin fins to make the helmet as human comfort

2640-2645 M. Shanmugam, K. Shanmugasundaram, P. Sukumar, M. Vignesh, G. Vineethkumar

Fabrication of PNEUMATIC bumper in four wheeler

2646-2650 R. Arjunraj, D. Karthick, R. Karuppusamy, K. C. Naveen kumar, J. Nizamdeen

Fabrication of 360 degree flexible drilling machine

2651-2656 R. Arjunraj, K. Kavinraj, K. Thandapani, M. Vimal.M

Design and analysis of smart seat belt system

2658-2664 P. Manickavasagam, K. Kannan, B. Keerthiraja, C. Poovarasan, V. Tamizharasu

Experimental investigation on composite catalytic converter for two wheeler

2666-2672 V. Vimala, N. ChandruBalaji, M. Surya, S. J. Syed Abdul Razak, S. Vignesh

Fabrication of exhaust GAS heat recovery by TEG

2673-2679 A. Karthy, N. Ranjeethkumar, S. Santhosh, C. Sridhar, P. Suresh Kumar

Experimental and investigation of AL - SI with magnesium composite material heat transfer by using PIN-FIN apparatus

2681-2683 D. Ravichandran, S. Cibichakravarthi, S. Karikalan, C. Gowtham

Design and fabrication of portable solar operated chemical sprayer

2684-2688 K. Pradeepkumar, S. Akilan, M. Gobinath, D. Gowtham, M. Guruprasath

Strength properties of extruded polyester fibrereinforced concrete with partial replacement of fine aggregate by foundry sand

1596-1603 Ranjitham M, Manjunath N V, Ashwin D, Maheswaran C, Monica D

Experimental investigation on the structural behavior of cold formed lean duplex stainless steel hollow oval section columns

1622-1633 S. Vijayanand, M. Rathipraba

Seismic analysis of R.C framed buildings resting on hilly slopes

1655-1662 PreethaV, GokulPrasath S, SureshKannanS, YohaPrakash S A

A study on investigating the effectuation of renewable energy for sustainable development in construction sector

1678-1685 N.Geethanraj, T.S.Mukesh

A study on impact assessment of pollution in Sipcot, Perundurai

1696-1704 R Sowmiya, D Ambika, V Sampath Kumar

Behaviour of reinforcement concrete sand wich beams

1719-1720 Ramasamy.B, Amirthagadeshwaran.G

A study on mechanical properties of engineered cementitious composites

1728-1735 M.Kirubakar, K.Sampath Kumar

An experimental investigation on partial replacement of coarse aggregate with plastic waste in rigid pavement

1744-1751 Sowmiya G, Amirthagadeshwaran G

Partial replacement of coarse aggregate by using ceramic tile aggregate in concrete

1767-1772 Prakash.S, Baskar.S, Tamilarasan.A, Venkatesh Prasath. P, Abdul Hameed. A

An experimental study on pervious concrete

1804-1809 M.Ranjithkumar, K.Jaganvicky, T.Mukilarasan, A.Nirmal kumar, K.Selvi

Study on durability properties of silica fume in concrete – A Review

1827-1831 S.K.Gowthame, B.Kiruthika Nandhini, B.Arjunkumar, S.Karvendhan, T.Mariyappan

Mechanical behaviour of glass fiber reinforced concrete

1849-1855 V.M.Gnanasundar, P.S. Ashwin Kumar, S. Poovasanthan

Experimental study for partial replacement of coarse aggregate with recycled rubber crumb

1871-1875 Tharanya S, Parthasarathy.S, Sridharan.S, Suriya.C, Yokash.M

Experimental investigation on paver block with partial replacement of msand by steel slag

1886-1891 M.Yeswant, K.Praveenkumar, A.Vijayakumar, K.K.Vijay, R.Nandhakumar

Comparative study on tensile property of different grades of concrete containing glass fibres

1904-1909 A.Anith, S.Aravindaswamy, S.Shivasankar

Experimental study on partial replacement of fine aggregate by eco-sand in concrete

1927-1933 G.L.Bharanitharan, D.Gobi, P.Karthik, G.Prabahara, R.Pradheepa

Effect of replacing fine aggregate with cast iron slag on strength of concrete

1947-1952 .P. Karthika, R. Prakash, R.Vidhyapathi, B.Arun Kumar, S.Mahakrishnan

Validation of experimental results of cold formed steel built up section with analytical and theoretical analysis

1953-1959 S. Gnana Venkatesh, E.Jayanth, T.Vikneshwar

An experimental study on behaviour of SIFCON with replacement of fine aggregates by quarry Dust

1967-1972 S.Marappan, M.Mohammed Rashoo, Mohaideen, S.Senthil Murugan, U.Udaya Sankar, P.Karthika

Study on durability properties of engineered CEMENTITIOUS composites

1983-1989 M.Sivasenthil, K.Sampath Kumar

Search rank fraud and malware detection in Google play application Nivodhini

225-2257 Nivodhini M.K, Vasuki .P, Lokesh .L, Monish Kumar, D, Naveen Kumar P.S

Identifying unknown and identical users in cross-application social media networks

2268-2272 S.Kavitha, Naveen Kumar.D, Santhosh Kumar.S, Vijhay Raj.M

Designing a dynamic task scheduler in map reduce for hadoop framework

2289-2293 D.Radhika, C.Shalini, T.Uma Maheswari, S.Pooja, G.Subatharani

Review of web service technologies: Soap vs XML

2294-2305 S.Karuppusam, S. Gowtham, R. Logeswari

Self protection in cloud resource management

2314-2321 S Maheshwar, Pratheeksha K A, Praveen T, Ranjith K U

Salient Region Detection for Video Surveillance

2333-2342 K.Kavitha, N.Keerthana, E.Monisha, R.Ragavi, R.Sowmya

ECDH algorithm for data storage security in cloud data centers

2356-2363 V.Manimara, A.Renuka, M.Santhiya, B.Swetha

Scalable access control for privacy-aware media sharing

2386-2393 Vanitha, S.Mahesawaran, M.Manjula Devi, P.Manoranjitham

Characterizing and Predicting Early Reviewers for Effective Product Marketing on E-Commerce Websites

2406-2419 S Maheshwari, Nandhini S, Nithya G, Yugesh J

Virtual Machine Placement in Cloud

2434-2442 P.Uma, V.A.Mouleeswaran, K.Mynthan kumar, R.Praveen kumar

Secure virtual machine based multi keyword data sharing on public cloud

2911-2917 B.Deepa, G.V. Kavipriya, K. Lakshmipriya, P. Karthik

IOT based platform as a service for air pollution monitoring system

2509-2511 .C. Rajan, S.Banu Chandar, P.Dhinesh Kumar, J.Francis Jebarson

Exploration of mechanical properties of aluminium and epoxy filled with iron waste and coal ash composite material

2689-2696 G. Velmurugan, M. Sanjay, K. Priyanka, C. N. Rindhya Priya, M. Chithra

Modification of copper surface for increasing contact angle of water droplet using physical methods

2697-2708 R.Yuvaraj, K. S. Sakthi Monish, R. Sanju Aravind, M. Sanjay, B. Santhosh

Study on tribological and mechanical behaviour of AA 7075 hybrid reinforced composite

2709-2715 V. Mohankumar, M. Vasanthavelan, K. Surya, S. Pon Murugan, S. Tamilarasan

Design of fixture for angular pipe cutting and its product failure analysis in root cause analysis

2716-2721 N. Senniangiri, T. Ajith kumar, M. Bharathi, P. Hariharan, J. Kavin

Design and analysis of bullet proof jacket

2722-2727 Muruganantham.S, Sabarimoorthy.S, Sivamani.D, Vignesh.K, Vikneshwaran.E

Fabrication of button operated electro-magnetic gear shifting system and increasing the efficiency of IC engine by using hydrogen fuel

2728-2732 T. Venkateshan, M. Manoj, S. Pravin Kumar, R. Prakashbabu

Fabrication of three axis hydraulic modern trailer

2733-2736 M. Shanmugam, G. R. Arunkumar, K. Ganesh, V. Gopalakrishna, M. Hariharan

Design and fabrication of semi-automatic gear shifting mechanism for physically challenged persons vehicle with reverse motion

2437-2742 A. Karthy, L. Aravindh, V. Arun, A. Boopathi, K. Divakar

Influence of tool pin profile on the mechanical properties of friction stir welded aluminium alloy

2743-2747 S. Karthikeyan, R. Abinash, T. Ajith Kumar, D. Akash, S. Aravind Kumar

Preparation of biodiesel from non edible extracts

2748-2753 Rajkumar. R, Balakrishnan. S

Design and fabrication of chainless bicycle

2754-2758 K. Ganesan, K. Kavin, S. K. Mathusankar, K. Nandhakumar, M. Kavin

Simulation of ultracharger

2759-2764 M. Manikandan, V. Chandru, R. R. Ghereesh, S. Srijesh

Performance and emission analysis of diesel engine using karanja oil biodiesel blend with diethyl ether

2765-2769 M. K. Murthi, M. Ragunath, A.Vellingiri, G. Rubanraja

Investigation on material properties of 3D printer by using multijet technology

2770-2775 S. Eswaran, J. Rajesh, R. Rajapandiyan, T. S. Rajesh, S. Surya

Wear and thermal analysis of AL/SI/GR Composite material applied in piston ring using ANSYS

2776-2782 M. Sengottaiyan, S. Boopathi Raj , M. Harish, U. Naveen Kumar, S. Jagan

Comparative analysis of vertical axis wind turbine (VAWT) with a different aerodynamic model

2783-2789 S. Balakrishnan, V. P. Mouleeswaran, V. Ponvivek, S. Praveen, P. Praveenkuma

Automatic mist wiper

2790-2799 G. Mylsami, R. Nithishkumar, S. Padmanaba, M. Naveenkumar, S. Praveenkumar

Design and fabrication of farming weeder and cutter under single operating mechanism

2800-2806 N. Senniangiri, T. Prabhakaran, M. Vasudevan, K. Surya, S. Seenivasan

Comparative analysis of wear rate of coated HSS tool and non-coated HSS tool by using CR-ZN-NI

2807-2813 K. Anandhu, M. Praveen kumar, D. Sownthararaj, P.Suresh, K.Tharanitharan

Experimental analysis of welding parameters of dissimilar al alloys by FSW & TIG welding

2814-2817 B.Sakthivel, C. Ragul, M. Sabarinathan, B. Venkatesh, M. Vignesh

Performance and emission analysis of diesel engine using karanja oil biodiesel blend with Butanol

2818-2823 M. K. Murthi, G. Gowri sankar

Design and analysis of modified savonius rotor

2824-2829 V. N. Loganathan, D. Arulkumar, S. Gnanasekar, C. Gokul, M. Gokulraj

Development of pyrolysis process reactor for extracting fuel from plastic waste

2830-2835 Easwaramoorthi M, Ajmal P.I.

Efficiency of low friction (TI-GE-CN) nano composite thin film coating for piston ring

2836-2841 V. Chandramohan, M. Nandha kumar

Design and analysis of hexagonal drive shaft in all-terrain vehicles

2842-2847 Balakumaran, K. Nithieskumar, R. Aravindan

Multipurpose smart farming equipment

2848-2853 N.Viswanathan, R.Prithiviraj, P.K.Sasikumar, D.Surender, K.Tamilarasu

Analysis of Copper Pipe in Solar Water Heater using Ansys-Fluent

2862-2868 R. Prakash, T. Suriyanarayan, S. Suwetha, R. Vinothkumar, M. Sivasurya

A review on performance improvement of flow field design for PEM fuel cell

2869-2874 M.Muthukumar, N.Rengarajan, C.Sasikumar, K.S.Kavin, M.Dharun

Design and fabrication of monowheel

2875-2878 V. N. Loganathan, M. Karthick, C. Logeshwaran, S. Manoj Kumar, R. Mukesh

Compressed air production with bumper and power generation using vehicle suspension

2879-2884 D. Latha, T. Enamullah, R. Gokul, M. Diwakar, A. ArunPandiyan

Design, Fabrication and analysis of abrasive jet machine using alternate abrasive particles

2885-2895 Dr. R. Rajavel, M. Surajkumar, K. Srividhya, S. vignesh, S. Logeswar

Investigation and research on enhancing life of spark plug by using silicon gel, chromium oxide and zinc oxide

2896-2902 Krishnamoorthi. T, Anand. A, Ashwinraj. R, Deepak. C, Muruganandham.

Animal health monitoring, rumination and location tracking by GSM module and MQTT based cloud server

2000-2005 Naveena K, Nivashini S, Noorasleena S, Sandhiya B, Divya S

Groundnut harvester

2006-2012 E.Vani, S.Thiruvengadam, L.Shanmugapriya, M.R.Stalin, S.Vignesh

Optimal scheduling of solar-wind systems and evaluating the demand response impacts on effective load carrying capability

2013-2018 Manikanth, Manikandan

Implementation of memory based multipliers for LUT optimization

2019-2024 P.Geethamani, G.Preethi, D.Lavanya, V.Sreesureya

DC starter motor performance testing using labview

2025-2029 Ravichandran.V, Thogaivel.

Enhancement of power quality using UPQC by ANN controller

2032-2038 M.Rajkumar, M.K Elango

Design and fabrication of magnet actuation technique to produce current

2039-2047 .K.Sathyasree, L.Dharshini, S.Renugadevi, S.S.Thulasimani

Smart home environment monitor and control using node MCU

2048-2052 B.Anusuya, G.Ramani

Stability analysis in smart grid with renewable energy sources

2053-2060 V. Kiruthiga Devi, T. Venkatesan, D. Sri Vidhya

Design anaysis of transformer parameters using simulink

2061-2065 M.Keerthana, N. Deepika, E. Shanthi, G. Raman

Harmonic reduction and power quality improvenment by using UPQC

2066-2070 S.Gokul, T. Sathish Kumar, A.Janatharan, B. Lokesh, K. Sathyasree

Smart solar powered pesticide sprayer

2078-2081 Arunkumar. V, Bharath. T, Pravin. J, Ragupathi. M, Sabari. P

Elegant live temperature, humidity, PH and moisture monitoring in agriculture system using IO

2082-2088 .G.Ramani , S.Dinesh Prabu, G.Geevanantham, B.S.Kannan, K.Logeshwaran

An efficient approach of mechanical pump sealing filter system using PLC

2089-2097 Satheesh.A, Kokila.P, Kokilavani.S, Priyatharshini.D.B, Thivisri.V

Smart communication system for human life safety system in industry

2098-2101 Arunkumar .V, Jeeva Raj.A, Kathiravan.R, Sakthivel .P, Sarathkumar .P

Improvement of coordinated bidirectional overcurrent relay’s sensitivity and load restoration time using neuro-fuzzy technique in smart grid

2102-2110 K Syed Mansoor, P Aravindan

Solar powered automatic irrigation system using moisture sensor

2111-2116 P.Praveen, T.Subash, K.M Subburathinam, M.Suresh, G.Ramani

A modeling of grid connected PV system with IoT

2925-2930 D.Bhuvaneshwari, S.Saravanan, P.Manikandan, N.Mohananthini, A.Senthilkumar

Hand gesture recognization for wheelchair control using pic microcontroller

2117-2122 B.Anjanadevi, G.Ramya, G.Roshini, M.Sangeetha, S.Prabhakaran

GPS and GSM based vehicle tracking system using arduino

2123-2130 R.Vijayalakshm, R.Vijayalakshm, A.Mathivathani, R.Shalini, R.Uma Mageshwari

Vehicle accident detection and alcohol detector system using arduino

2131-2137 C. Mahesh, R. Karthickkumar, M. Tamilselvan, M. Saravanakumar

Implementation of enhanced sit algorithm for embedded systems

2138-2142 N. Hemala, T. Satheesh

Smart meter reading monitoring system for home using power line communication

2148-2151 S. Mohanakrishnan, K. Naveen Kumar, A.Ramaswamy, R. Rangasamy, Pratheeba

Energy management of PV and wind hybrid system

2152-2155 Elango. S, Navin Kumar. S, Ranjith Kumar .S, Surendran .V.P

I went for an Aari Embroidary class in city Aari works. I had a good experience and learned properly.

2143-2147 M.Boopathi, R.Karthikeyan, R.Gowthaman, S.Krishnakumar, M.Prabu

Accident reporting and guidance system using GPS

2156-2160 M.Prabhu, R.Giridharan, S.Gokulnath, R.Nisanth, G.Ranjithkumar

Transformer less inverter for PV grid tied applications

2161-2164 Elango.S, Dinesh kumar.S, Karthikeyan.N, Manimaran.S, Manojkumar.M

Integrated renewable energy and smart grid system to improve voltage quality and harmonic distortion losses at electric vehicle charging stations

2165-2169 Krishna Gandhi. P, Ponnumani. T, SarathKumar.S, Soundararajan.P, Suvaraj.C

Automation of solar adsorption refrigeration system

2995-2998 Ravichandran. V, Arun. N, Praveen Raja. S, Manikandan .G

Vehicle to vehicle communication using LI-FI technology

2168-2172 Krishna Gandhi, Karan.P, Kathirvel.M, Deepak Raj.G, Karthick.R

Reactive power compensation using PV grid

2173-2176 Elango.S, Manikreddy.B, Karthikselvan.R, Divagar.K, Venkata surendra.K

Design and implementation of automated car parking system using RFID

2177-2181 Ramraj. B, Mohanaram. P, Thangavel. M, Venkatachalam. K

Solar based trapper for pest control

2999-3001 Nandhakumar.P, Priyatharsan.P, Ramkumar.S, Sivakumar.P, T.Jayakumar

IOT based energy meter

2182-2186 Ramraj.B, Parthiban.V, Peppatto.A, Satheesh.R

Controlling boiler feed water flow by using quasi-z-Source indirect matrix converter fed Induction motor drive

2187-2191 C.Pratheeba, Y.Binu Christina, S.Garunyaa, S.Nandhini, R.Sudhani

Smart dust bin based on IOT monitoring system

2192-2201 Vijayalaxmi.B, Boopathi Raja.R, Gandhi. K, Harikrishnan.M.G, Manoj.E.P

GSM based power theft monitoring and controlling system using ARDUINO

2202-2209 Ramraj.B, Krishnaraj.C, Praveen kumar.T, Ravichandran.P, Vignesh.P

Robotized Arecanut tree climber and pesticides sprayer

2210-2215 A.Vasanthi, G.Ramesh, M.Ranjani, M.Praveen Kumar, A.Vanitha Mani

Fabrication of solar powered automatic seed sowing machine

2216-2220 C.Karthikeyan, J.Poornima, P.Saranya, P.Sivasakthi, S.Sivasakthi

Hybrid energy harvesting system for charging stations

2221-2226 Ramya M M, Vinothkumar D, Rajeshwari K, Soorya S, M.Subramani

Design and comparison of new DWT – OFDM with conventional based system

2227-2235 M.Devipriya, .R.Kalaivani, P.Sureshkumar

Dual watermarking for video using discrete cosine transform

2973-2980 T.Jayachandran, P.Divyabharathi, S.Gopal, S.Karthika, B.Srividhya Bharani

Analysis of microstrip patch antenna for 5G mobile communications

3002-3014 .P.Kokila, Logeshwaran.N, NarayanaMoorthy.S, Nithyanandhan.S, Shobana.M

Analysis and detection of bone tumor in MRI images using machine learning

2918-2924 Vanitha K, Jeeva S, Nandhine K T, Nihal M A, , Monisha K

Efficient voltage control strategis for fuel cell energy system in power grids using statcom

2931-2939 R.Sankarganesh, B.Robin Sargunaraj

Integrated voltage compensator for three phase system using UPQC with PV source

2940-2945 R.Sankarganesh, S.Mahudeshwaran

Reactive power management system to improve the power factor and reduce the transmission line losses

2946-2954 G.Ramakrishnaprabu, B.Raguraman

Stability analysis in smart grid for reactive power management using PV

2955-2960 R.Sathish, M.Namachivayam

Big file transfer over multiple paths in cloud computing

2961-2965 A.Sinthiya, A.Gopalakrishnan

Improvement of the WAMS communication network against late attacks

2966-2972 D.Kalaivani, J.Gayathri

A new inductorless RGC lna design in 32 –nm CMOS technology

2981-2984 Edamadaka Keerthana, P.Geerthana, R.S.Haritha, N.Ganesh, M.Anto bennet

Optimizing the convolution operation to accelerate deep neural networks on FPGA

2985-2994 V. Saravanan, R.Susmitha

Energy efficiency and delay in 5g ultra reliable low latency communications system architecture

3015-3023 S.Saranya, D.Prasanna

Automated class attendance system based on multi face recognition using deep learning method

3024-3030 D.Kokila, R.VijayaRajeswari

Stability analysis of hybrid wind and solar system with super capacitor storage

3031-3036 R. Devarajan, A.Kumaran

Enhancement in heat transfer rate in diesel engine radiator using nano fluid

3037-3042 M. Leela Ramesh, A. Sai Teja, B. Charitha

Novel review of security issue in security model of cloud computing facing environment

3184-3190 Venkatakoti Reddy.G, V.Krishna, K.V.Murali Mohan

Experimental investigation on utilization of waste materials in fly ash brick

3043-3057 S.Elango, K.Selvakumar, S.Indhu

Resource planning for construction of road bridge at 5.45km in Cauvery – Vaigai – Gundar link – a component of peninsular rivers development

3058-3068 R.K.Manikandan, R.Balamurugan, R.Renganathan, K.STamilmaran

A study of risk assessment and management in construction

3069-3074 B.Manibalu, KE.A.Palaniappan, S.Gopinathan, N.Rajalakshmi

Advancements in shotcrete technology

3075-3082 R.Rajarajeshwari, H.Vijayakumar, R.Balamurugan, R.Renganathan

Assessing and managing potential risk in industrial construction

3083-3088 C.Sivakarthikeyan, M.Moorthy, M.Muralikrishnan, R.Balamurugan

Chemical study on sea sand in composite flexural element

3089-3093 C.Sivakarthikeyan, M.Moorthy, M.Muralikrishnan, R.Balamurugan

Crowd and pedestrian dynamics empirical investigation and simulation

3094-3097 N.Valarmathy, M.Muralikrishnan, S.Aruljothy, A.C.Karthikeyan

Evaluating safety performance in construction projects by using MS excel

3098-3108 R.Anbarasi, R.Balamurugan, M.Muralikrishnan, S.Aruljothi

Evaluation of passenger satisfaction towards railway service in Madurai Junction

3109-3114 N.Valarmathy, KE.A.Palaniappan, S.Gopinathan, .N.Rajalakshmi

Experimental investigation on of paper waste cement concrete

3115-3120 KE.A.Palaniappan, A.C.Karthikeyan, S.Aruljothy

Experimental investigation on fermentation of fruits and vegetables waste for ethanol production

3121-3125 C.Sakthipriya, M.Moorthy , C.Sivakarthikeyan

Experimental study on strength properties of copper slag in concrete

3126-3128 B.Manibalu, KE.A.Palaniappan, S.Gopinathan, N.Rajalakshmi

Experimental investigation on RC beam by using SIFCON laminate

3129-3138 M.Vinodhini, R.Balamurugan, R.Renganathan, H.Vijayakumar

Partially replacement of sand with crushed brick masonry in concrete

3139-3151 R.Anbarasi, A.C.Karthikeyan, H.Vijayakumar

Experimental investigation on concrete using waste paper

3152-3158 C.Sakthipriya, C.Sivakarthikeyan, M.Moorthy

Segmental analysis and design of superstructure for box girder balanced cantilever bridge by IRC specification using MIDAS civi

3159-3167 R.Anbarasi, S.Aruljothy, R.Balamurugan, R.Renganathan

Strengthening of column by using confinement techniques

3168-3176 S.Gopinathan, H.Vijayakumar, A.C.Karthikeyan, N.Rajalakshmi

Study on the performance and durability of hemp concrete

3177-3183 A.Bhavani, Ke.A.Palaniappan, S.Aruljothy, J.Vino

Design evaluation and optimization of a disc brake

3191-3201 E Y Mahimadass, V.Suresh, Pedamuthevi Vijayanand