Main Article Content

Abstract

The paper reports the effect of concrete using steel slag and M-sand as coarse aggregate replacement, in this project work, the concrete grade M25 was selected and IS method was used for mix design, The properties of materials for cement, fine aggregate, coarse aggregate, steel slag and M-sand were studied for mix design, The various strength of concrete like compressive strength, split tensile strength, flexural strength were studied for various replacement of fine aggregate using copper slag and M-sand that are 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, and 45%. The maximum compressive strength of concrete attained at 30% replacement of steel slag by partial replacement of coarse aggregate at 7, 14 and 28 days. The split tensile strength and the flexural strength were also obtained higher strength at 30% of replacement level at 28 days.

Article Details

How to Cite
Nadish, Nirmal, Sathyamoorthy, Vinithkumar, & Sarankokila. (2018). Experimental study on partial replacement of course aggregate by steel slag in cement concrete . International Journal of Intellectual Advancements and Research in Engineering Computations, 6(2), 1281–1286. Retrieved from https://ijiarec.com/ijiarec/article/view/644