Main Article Content

Abstract

-At present, most of the Industries are shifting towards automation. In earlier days, the inspection and controlling processes were done through human workers. There is a possibility of human errors while measuring the parameters value. Lack of monitoring and controlling can affect humans and environment. So, in Thermal power station the monitoring and controlling process of the parameters is a challengeable task. As this plant has to work 24 hours, so it was quite difficult to monitor and control parameters in site at each and every moment without any issues. So reliable monitoring and controlling system is required. Therefore we are proposing this system by using Arduino and graphical representation of LabVIEW to monitor and control the parameters like boiler drum level and Steam temperature. LabVIEW will display the graphical representation, accurate values and waveform of the parameter variations. This system mainly consists Temperature sensor and Water level sensor. All the sensors data is processed using Arduino. When there is a sudden increase or decrease in the level, GSM module is used to alert the higher officials through Short Message Service (SMS)

Article Details

How to Cite
V.S.Sathishkumar, N.Ranjitha, A.Sabareesh, S.Sandhiya, & A.Sandhiya. (2018). LABVIEW based thermal power plant Monitoring and controlling using GSM technology . International Journal of Intellectual Advancements and Research in Engineering Computations, 6(1), 225–230. Retrieved from https://ijiarec.com/ijiarec/article/view/441